Описание

Expansion Unit of LED lighting
Model CA-DC20E
Type Light control expansion unit
Output Light control method (1) Constant voltage control method (direct current light) (2) Pulse width modulation method (light emitting frequency: 100 kHz) [System setting]
Intensity range 255 level digital [Program setting]
Connection points 2 CH (LED connector connections and terminal block connections can be made)
Voltage 12 VDC, 24 VDC [DIP switches can be used to switch the setting]
Capacity Max. 40 W (30 W/1 ch maximum)
Synchronisation FLASH output synchronization, continuous lighting [the controller can be used to switch the setting]
Response speed (1) Constant voltage control: under 10 ms during 12 V output, under 20 ms during 24 V output (2) Pulse width modulation method: under 1 ms during 12/24 V output
Display LED display Light intensity: display green/orange (over 128) Error displayed: red (all lit)
Input voltage 24 VDC ±10%
Rating Current consumption 3.0 A (12 V output at maximum load)6.5 A (24 V output at maximum load)
Environmental resistance Ambient temperature 0 to +50 °C
Relative humidity 35 to 85 % RH (No condensation)*1
Weight Approx 590 g
*1 The environmental resistance of the LED illumination unit is an ambient operating temperature of 0 to +40 °C and an ambient operating humidity of 35 to 65 % RH (No condensation).
''